(57)
Message time limit exceeded
(58)
Login failed
Status codes in the event of a gateway error
No.
Cause / Remedy
(101) CAN Connect setting is active and no CAN connection could be estab-
lished to the gateway for at least 2 minutes.
(102) Gateway has no connection to the back-end.
Status codes in the event of a charging error
No.
Cause / Remedy
(31)
Time exceeded in the I1 phase
(32)
Time exceeded in the U1 phase
(33)
Battery overvoltage in the I2 phase
(34)
Ah exceeded
(35)
Time exceeded in the I2 phase
(36)
Target voltage in the I2 phase not reached (only with format characterist-
ic)
(37)
RI charge error
(38)
Set charging time cannot be reached
(39)
Time exceeded during RI charge
Status codes in the event of an error in the primary circuit
No.
Cause / Remedy
(500) Temperature sensor module 1 (top) defective
(501) Temperature sensor module 2 (bottom) defective
(502) Temperature sensor PCB defective
(503) Primary overtemperature
(504) Fan blocked / defective
(505) Over-/undervoltage in intermediate circuit
(506) Asymmetry in intermediate circuit
(507) Primary supply voltage out of tolerance
(508) Grid failure
(509) Incorrect device configuration
(510) Primary EEPROM faulty
(527) Phaseshifter overcurrent
54
