As long as a battery is connected to the battery charger, the charging process
can only be interrupted and resumed by pressing the "Pause/Start" button. It is
only possible to change the display modes with the "Menu" button, as described
in the "Display" chapter, after disconnecting the battery from the battery char-
ger.
Ending the char-
ging process
WARNING!
Danger due to oxyhydrogen ignition caused by sparks when disconnecting the
charging cables.
This can result in severe personal injury and damage to property.
▶
Before disconnecting or unplugging the charging plug, end the charging pro-
cess by pressing the "Pause/Start" button.
WARNING!
Danger if the plug connection is disconnected during the charging process
This can result in severe personal injury and damage to property.
▶
Do not disconnect the plug connection while the charging process is running.
▶
Do not touch live contacts on the charging plug.
NOTE!
Danger of battery damage when disconnecting the battery from the battery
charger if the charging process is not yet fully completed.
This can result in damage to the battery.
▶
Do not disconnect the battery from the battery charger until it is fully
charged (green "Battery is charged" indicator lights up).
Once the battery is fully charged and cooled down, the following indicators light
up:
-
"Battery is charged" indicator
(green)
-
"Battery cold" indicator (blue)
For optimum battery life, do not dis-
connect the battery from the battery
charger until the blue "Battery cold"
indicator lights up in addition to the
green indicator, as explained below. If
several battery chargers are in use, re-
move the battery that has been fully
charged (coolest) for the longest time
first.
End the charging process as follows:
1
Press the "Pause / Start" key.
31
EN-US
