In standard mode, the display shows
the battery charger parameters:
-
Type of battery (e.g., Pb-WET)
-
Charging characteristic (e.g., IUI)
-
Nominal voltage (e.g., 48 V)
-
Capacity (e.g., 300 Ah)
-
Weekday, date and time
The battery charger parameters are individually adjustable. Detailed information
can be found in the "Configuration mode" section.
Menu selection
Switch to the menu selection from standard mode as follows:
1
Press and hold the "Menu" button for approx. 5 seconds.
Switch to the menu selection from the other modes as follows:
1
Press the "Menu" button briefly.
Open the desired mode:
2
Use the "Up/Down" buttons to select the symbol for the desired mode.
-
e.g. the battery symbol for standard mode
3
Press the "Pause/Start" button to confirm the "check mark" symbol.
Statistics mode
In statistics mode, horizontal bars
visualize the frequency of the following
operating states of the device:
-
Idle
-
Charging
-
Floatingcharge
-
Cooldown
-
Error
1
Use the "Up/Down" buttons to switch between page 1/2 and page 2/2.
Page 2/2 shows the following values:
-
Total number of charges
("Charges").
-
Total Ah delivered.
-
Average Ah delivered per charge
("Charge").
-
Total energy consumed (kWh).
-
Average energy consumed (kWh)
per charge ("Charge").
34
