Fronius RCU 5000i, Operating Instructions & Spare Parts

Page: 149 / 248

149
EN
Incrementing the
component num-
ber Incrementing the part number can be performed manually using F1 and F2 or by job.
"Part number counter" screen, parameter "Increment"
set to "Manual"
Call up the "Documentation" menu
item
Select "Component counter" screen by
pressing the right arrow key (8)
– "Component counter" screen ap-
pears
Select the "Increment" parameter
using the down (6) or up (7) keys
"Component counter" screen with manually incremen-
ted component number
Manual incrementing
Set "Increment" parameter to "Manual"
using the adjusting dial (18)
–
To increment the part number press F2
"+", to reduce the number press F1 "-"
– The component number is in-
cremented (or decremented).
"Component counter" screen with incrementing of
component number by job no. 5
Incrementing by job
Set "Increment" parameter to "Job"
using the adjusting dial (18)
Enter the number of the job whose
component number is to be incremen-
ted using the "Job trigger" parameter.
– The part number is incremented
each time the job specified in the
"Job trigger" parameter is selec-
ted.
1
2
3
IMPORTANT! If the "Increment" pa-
rameter is set to "Manual", the value
of the "Job trigger" parameter has no
effect on incrementing the part num-
ber.
4
5
4
5