Fronius DeltaSpot, Operating Instructions/Spare Parts List

Page: 50 / 84

48
DeltaRemote Plus remote control functions
After switching on the system
Press the Move to reference point key
(1)
Reference point LED (2) lights up and
indicates that the spot welding gun is
ready
Sheet thickness
correction Rotate the sheet thickness corrector to adjust the position of the gun arm so that when
closed the drive is located within the operating range (1). The closed position depends on
the thickness of the sheets being welded.
Detail showing welding gun drive in the X-gun opera-
ting range
(1) Operating range: 10 - 15° from top
dead centre
(2) 0 - 10° = top dead centre
(3) Sheet thickness correction
Adjusting sheet
thickness correc-
tion Start the "Sheet thickness compensation" function in Fronius Xplorer (worksheet:
"Overview" - option menu "Calibration - sheet thickness compensation")
(1)
(2)
1
2
(1)
(2)
(3)
-15°-10°
IMPORTANT! If the operating point in the
closed position is outside the defined oper-
ating range, the specified gun force cannot
be applied.
1