Fronius DeltaSpot, Operating Instructions/Spare Parts List

Page: 13 / 84

11
EN
Safety measures
at the installation
location and dur-
ing transport
Danger of crushing
Do not place hands or other body parts between the welding electrodes.
Risk of cutting!
Wear safety gloves when handling sharp objects.
Covers and side panels may only be opened/removed while maintenance or
repair work is being carried out.
During operation:
-
ensure that all covers are closed and all side panels are fitted properly.
- keep all covers and side panels closed.
Never touch the workpiece, electrodes or process tape during or after welding
- risk of burns.
Welding residues can jump off cooling workpieces. The specified protective
equipment must therefore also be worn when reworking workpieces, and
steps must be taken to ensure that other people are also adequately protect-
ed.
Welding electrodes, process tape and other parts with a high operating tem-
perature must be allowed to cool down before handling.
Special provisions apply in areas at risk of fire or explosion - observe relevant
national and international regulations.
Risk of scalding from escaping coolant. Switch off cooling unit before discon-
necting coolant flow or return lines.
Use only suitable load-carrying equipment supplied by the manufacturer when
transporting devices by crane.
- Hook chains and/or ropes onto the suspension points provided on the
load-carrying equipment.
- Chains/ropes must be at the smallest angle possible to the vertical.
A device that topples over can easily kill someone. Place the device on a solid,
level surface.
Special regulations apply in rooms at risk of fire or explosion
-
observe relevant national and international regulations.