Fronius Cleaning Unit TC 2000, Operating Instructions Manual

Page: 17 / 68

17
EN-US
General
Device Concept
Base unit with cleaning unit
The cleaning device consists of
-
a base unit – the Robacta TC 2000 ext.
/ Robacta TC 2000 ext. US and
- a cleaning unit – the Cleaning Unit TC
2000 in various versions
The cleaning device is designed to clean a
variety of different welding torch geomet-
ries. The components are housed in a ro-
bust housing. The compact design permits
installation in the smallest of spaces.
The cleaning device is largely maintenan-
ce-free, since there are no parts subject to
mechanical stress.
Applications The cleaning device is intended for the cleaning of welding torches in automated steel ap-
plications. The cleaning device is designed for use:
-
In the automotive and supply industry
- In equipment engineering
- In chemical plant construction
- In mechanical engineering
- In rail vehicle construction
- In shipyards
Warning Notices
on the Device The device has safety symbols and a rating plate fitted. These safety symbols and the rat-
ing plate must not be removed or painted over. The symbols warn against operating the
equipment incorrectly, as this may result in serious injury and damage to property.