Fronius Calibration system 2.0, Operating Instructions Manual

Page: 86 / 100

1
Start the calibration program
2
Click [New calibration]
The preliminary settings / contractor data are displayed.
3
Enter the details for a new contractor (= Person performing calibration):
- Name
- Address
- Postcode
- Calibration technician
4
Click on [Add]
or
select current contractor from the list shown
5
Enter the serial numbers of the measuring equipment:
- Calibration system
- Welding wire calibration system
- Gas measurement system
6
Click [Next >]
The preliminary settings / customer data are displayed.
7
Enter the details for a new client:
- Name
- Address
- Postcode
- Customer number
8
Click on [Add]
or
select current client from the list shown
Under Others, inventory numbers, order numbers and observations can be
entered.
9
Click [Next >]
The preliminary settings / device selection are displayed.
10
Under Settings, select the connection to the power source:
o SpeedNet
Establish connection to the WeldCube Connector
(for details, see WeldCube Connector Operating Instructions
42,0426,0363,xx)
11
Determine the welding circuit resistance of the welding system incl. Weld-
Cube Connector
12
Start WeldConnect app and open menu
86