Fronius Calibration system 2.0, Operating Instructions Manual

Page: 55 / 100

3
3
3
Connect the gas and data connec-
tions to each other
Calibrating the
welding system IMPORTANT! Before starting the calibration process:
- All devices to be calibrated must be connected to the calibration system:
power source, wirefeeder, shielding gas supply; etc.
- The power source to be calibrated must be switched on at least 5 minutes
before the calibration process starts.
The calibration process is started from the calibration software on the com-
puter / laptop.
1
Start the calibration program
2
Click [New calibration]
The preliminary settings / contractor data are displayed.
3
Enter the details for a new contractor (= Person performing calibration):
- Name
- Address
- Postcode
- Calibration technician
4
Click on [Add]
or
select current contractor from the list shown
5
Enter the serial numbers of the measuring equipment:
- Calibration system
- Welding wire calibration system
- Gas measurement system
6
Click [Next >]
The preliminary settings / customer data are displayed.
55
EN