❒ Mount the holding bracket of the proximity sensor
➥ The cable of the proximity sensor must point to the left
❒ Loosen stop on stop lever and reassemble on opposite side
❒ Mount the stop lever on the drive linkage
❒ Mount the clamping bracket to the base plate of the filter
➥ The rubber buffer must point towards the stop lever
❒ Mount the clamping lever on the clamping bracket
❒ Attach the tension spring to the tension lever and to the stop lever and press
downwards
➥ Attach to the previously used hole (A)
❒ Secure the position of the clamping lever with eyebolt and spring cotter
Assembly
5
Adapting the electrostatic precipitator system (if required)
Installation and Operating Instructions EF 250-500 | M2140120_en
25
