2
Safety information and use
2.1 Requirements for the user
This operating manual is intended for persons assigned with operating
and monitoring the Fritsch PULVERISETTE 16. The operating manual and
especially its safety instructions are to be observed by all persons
working on or with this device. In addition, the applicable rules and regu-
lations for accident prevention at the installation site are to be observed.
Always keep the operating manual at the installation site of the PULVERI-
SETTE 16.
People with health problems or under the influence of medication,
drugs, alcohol or exhaustion must not operate this device.
The PULVERISETTE 16 may only be operated by authorised persons and
serviced or repaired by trained specialists. All commissioning, mainte-
nance and repair work may only be carried out by technically qualified
personnel. Qualified personnel are persons who, because of their educa-
tion, experience and training as well as their knowledge of relevant
standards, regulations, accident prevention guidelines and operating
conditions, are authorised by those responsible for the safety of the
machine to carry out the required work and are able to recognize and
avoid possible hazards as defined for skilled workers in IEC 364.
In order to prevent hazards to users, follow the instructions in this
manual.
Malfunctions that impair the safety of persons, the PULVERISETTE 16 or
other material property must be rectified immediately. The following
information serves both the personal safety of operating personnel as
well as the safety of the products described and any devices connected
to them: All maintenance and repair work may only be performed by
technically qualified personnel.
This operating manual is not a complete technical description. Only the
details required for operation and maintaining usability are described.
Fritsch has prepared and reviewed this operating manual with the
greatest care. However, no guarantee is made for its completeness or
accuracy.
Subject to technical modifications.
2.2 Scope of application
The function of the high-performance cross beater mill is the comminu-
tion of elastic and fibrous products and product mixtures in batches or
on a continuous basis. In addition, this device is not designed to grind
wet or moist materials. The special design of the cutting tools in conjunc-
tion with the drive produces a fast, efficient grinding without disruptive
interference with the material to be comminuted.
The device allows particularly effective comminution of heterogeneous
material mixtures such as e.g: slags, lime, stone samples or ores. The
grinding stock is warmed only slightly, making the mill suitable for tem-
perature-sensitive materials.
Safety information and use
- 7 -
