5
Initial start-up
CAUTION!
Never operate the device without the bottom sieve in
place!
Risk of injury through possibly reaching in from below!
CAUTION!
Only operate the device with the collecting vessel
mounted!
Switch on the device only after all work as described in section
Chapter 4 ‘Installation’ on page 16 has been carried out!
5.1 Switching on
n
Ensure that the mill is closed before switching on the device using
the main switch on the reverse. (I)
5.2 Function check
1.
Set the speed to 2000 rpm on the control panel using the "+" and
"-" buttons.
2.
Start the function check by pressing the "START" button.
ð
The mill starts up.
3.
Press the "STOP" button to stop the device.
ð
The cross beater is braked. After the engine comes to a stop,
the door can be opened.
5.3 Switching off
Switch the devices off (O) at the back using the main switch.
Initial start-up
- 20 -
