9.3 Setting the impact plates
The impact plates experience a certain amount of wear during use. If
there is a high degree of wear, the gap between the impact plates and
grinding insert becomes too large. You can reset this gap with the help of
the supplied setting plate.
1.
Position the setting plate between one of the impact plates and
the toothed inner side of the grinding insert and hold the plate in
place.
2.
Loosen the 2 hexagon screws which are used to fasten the impact
plate.
3.
Press the impact plate against the setting plate and retighten the
two hexagon screws.
4.
Perform these settings with the other two impact plates in the
same manner.
5.
Remove the setting plate. The impact plates have now been prop-
erly set.
Maintenance
- 32 -
