7
Accessories
7.1 Collecting vessel
For batch or continuous operation, the PULVERISETTE
16 can be retrofitted with the 30 l plastic container and
the LABORETTE 24, available as accessories.
7.2 Universal support stand
1 Mounting plate
2 3 x cross braces
3 4 x stand legs
4 6 x clamping rings + 12 x w 6 x M6 nuts + 6 x
M6x25 cylinder screws
5 4 x protective caps
To assemble the universal support stand, proceed as follows:
1.
Lay the mount plate on a flat surface.
2.
Slide 2 clamping rings over 2 of the 4 stand legs.
3.
Slide the remaining 2 clamping rings on the two other stand legs.
4.
Screw the 4 stand legs into the mounting plate so that the ones
with the 2 clamping rings on the side of the smaller section of the
mounting plate are fastened.
Accessories
- 27 -
