Freggia DWI6159, User Manual

Page: 4 / 44

4
Getting familiar with your machine
GETTING FAMILIAR WITH YOUR MACHINE SAFETY INFORMATION AND
RECOMMENDATIONS
Note : If you will only make pre-washing, select prewash program with
program selection button.
• 7. ½ HALF LOAD BUTTON
Using the function ½ , three sorts of washing up can be done those being lower
basket, upper basket and both baskets.
If you have little amount of dishes in your machine and if you have
to wash them, you can also activate the semi-fi lling function in some
of the programs additionally. If you have dishes in both baskets, press
the key ½ and select the position in which both lamps are highlighted.
If you have dishes only in the upper basket, pres the key ½ and select
the position in which the upper lamp is illuminated. Thus, washing up
shall be done only on the upper basket of your machine. No dishes
should certainly be available in the lower basket while using this
feature.
If you have dishes only in the lower basket, press the key ½ and select
the position in which the lower lamp is illuminated. Thus, washing up
shall be done only on the lower basket of your machine. In using this
feature, make sure that there are no dishes in the upper basket.
Note : If you have used an extra feature on the latest washing program, this
feature will remain active also on the next washing program. If you do not
want to use this feature on the newly selected washing program, press the
selected feature button again, and check that the lamp on the button goes off .
Note: When you select an incompatible program with the half load button,
a buzzer sound is heard which indicates that the selected option is not
compatible.
• 8.) SALT LACK WARNING INDICATOR
In order to see whether softening salt in your machine is suffi cient or not, check salt
lack warning light on the display.When salt light warning light starts coming on, you
need to fi ll in the salt chamber.
• RINSE AID LACK WARNING INDICATOR
In order to check that there is suffi cient rinse aid in your machine check rinse aid lack
warning light on the display.When rinse aid warning light starts coming on , fi ll in
rinse aid chamber.
• END OF PROGRAM INDICATOR
End of program indicator on the control panel turns on when the selected washing
program is completed .Your machine also gives a buzzer sound for “5 times” when
the program is completed.
RECYCLING
• Certain components and the packaging of your machine have been
produced from recyclable materials.
• Plastic parts are marked with international abbreviations: (>PE< , >PS< ,
>POM<, >PP<...)
• Cardboard parts have been produced from recycled paper and they
should be disposed of into waste paper collection containers for recycling.
• Such materials are not suitable for being disposed of into garbage bins.
They should be delivered to recycling centres instead.
• Contact relevant centres in order to obtain information on methods and
points of disposal.
SAFETY INFORMATION
• WHEN YOU TAKE DELIVERY OF YOUR MACHINE
• Check for any damage to your machine or to its packaging. Never start a
machine damaged in any way, make sure to contact an authorised service.
• Unwrap the packaging materials as indicated and dispose of them in
accordance with the rules.
• THE POINTS TO PAY ATTENTION DURING MACHINE INSTALLATION
• Choose a suitable, safe and level place to install your machine.
• Carry out the installation and connection of your machine by following
the instructions.
• This machine should be installed and repaired by an authorised service
only.
• Only original spare parts should be used with the machine.
• Before installing, be sure that the machine is unplugged.
• Check whether the indoor electrical fuse system is connected according
to the regulations.
• All electrical connections must match the values indicated on the rating
plate.
• Pay special attention and be sure that the machine does not stand on the
electricity supply cable.
• Never use an extension cord or a multiple socket for making a connection.
The plug should be comfortably accessible after the machine has been
installed.
• Please assemble the dishwasher, which is inserted under or in the kitchen
platform, according to the instruction. Be sure that the product is fi xed
properly.
• After installing the machine to a suitable place, run it unloaded for the
fi rst time.
• IN DAILY USE
• This machine is for household use; do not use it for any other purpose.
Commercial usage of the dishwasher will void the guarantee.
• Do not get up, sit or place a load on the open door of the dishwasher, it
may fall over.
• Never put into the detergent and rinse aid dispensers of your machine
anything other than those detergents and rinse aids which are produced
specifi cally for dishwashers. Our company will not be responsible for any
damage that might occur in your machine otherwise.
• The water in the machine’s washing section is no drinking water, do not
drink it.
• Due to danger of explosion, do not put into the machine’s washing
section any chemical dissolving agents such as solvents.
• Check whether plastic items are heat-resistant before washing them in
the machine.
• Do not put into your machine those items which are not suitable for
dishwashing. Also, do not fi ll any basket above its capacity. Our company
will not be responsible for any scratch or rust to form on the inner frame
of your machine due to basket movements otherwise.
• Especially because hot water may fl ow out, the machine door should not
be opened under any circumstances while the machine is in operation.
In any case, a safety devices ensures that the machine stops if the door
is opened.
• Do not leave your dishwasher’s door open. Failure to do so may lead to
accidents.
• Place knives and other sharp-ended objects in the cutlery basket in
blade-down position.
Capacity 15 place settings
Height 820 mm – 870 mm
Width 596 mm
Depth 550 mm
Net Weight 38 kg
Electricity input 220-240 V, 50 Hz
Total Power 2200 W
Heating Power 2000 W
Pump Power 100 W
Drain Pump Power 30 W
Water supply pressure 0.03 MPa (0,3 bar) - 1 MPa (10 bar)
Current 10 A
• Producer company has its right to amend design and technical
specifi cations reserved.
• The machine’s service life is 10 years (the duration required to keep spare
parts for the machine to fulfi l its usage functions).
CONFORMITY WITH THE STANDARDS AND TEST DATA / EC
DECLARATION OF CONFORMITY
All stages related to the machine are executed in accordance with the safety rules
provided in all relevant directives of the European Community.
2004/108/EC, 2006/95/EC,IEC 436/DIN 44990, EN 50242