(2) Call Book–
The FGRIO Master’s serial number must be programmed as entry #0 in the IO
Slave’s Call Book. Set “Entry to Call” to 0. In addition, the Network ID must be set to the
same ID as the rest of the network. Programming both the Call Book and Network ID set-
tings is unique to the FGRIO System and must be done for both integrated and stand alone
applications.
Figure 17
Set Up with Tool Suite (cont.)
IO Slave-
In order for the FGRIO System to function properly, the following settings must be
programmed. For all other settings not listed below, please refer to the User Manual.
Set Operation Mode Tab-
(Figure 17)
(E) FGRIO Slave–
The modem mode of (E) IO-Slave (NOT IO-MODBUS) must be used in
the FGRIO System.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-20028-FreeWave-FGR2-IO-IOE-Radio-Enclosed-900-MHz-I/O-Slave-Radio.aspx
