Fig. 9
(9) FGRIO Setup (cont.)
(9) TimeOut– 0-255. This setting determines the amount of time to wait before issuing a
Link Alarm due to loss of communication between the FGRIO Master and IO
Slave. A setting of 1 = 1/6 second
6 = 1 second
42 = 7 seconds
252 = 42 seconds
(A) Sensor Power– 0 or 1. A setting of 0 supplies continuous power to the sensor at the
IO Slave. A setting of 1, “Gated”, is used when the RTU provides a switched
power output to control powering the sensors at the IO Slave and analog outputs of
the FGRIO Master on and off.
Set Up with HyperTerminal (cont.)
FGRIO Master
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-20028-FreeWave-FGR2-IO-IOE-Radio-Enclosed-900-MHz-I/O-Slave-Radio.aspx
