Spread Spectrum Wireless Data Transceiver User Manual
In the next example a setup is shown where a Master routinely calls a number of Slaves at different
times. The Master is communicating with a transceiver designated as a Slave/Repeater that is connected
to a remote device. Since this device is placed in an elevated location, the transceiver may also be used
as a Repeater when it is not used as a Slave. At any time the Master may call any of the Slaves, establish
a connection, and send and receive data.
The next diagram depicts a standard Point-to-MultiPoint system. In this example, any data sent from the
Master is broadcast to all three Slaves, one of which receives it through a MultiPoint Repeater. The data
is in turn sent out of the RS232 port of each of the three Slaves.
LUM0002AD Version
6.1
51
