Spread Spectrum Wireless Data Transceiver User Manual
Baud Rate
This setting is the communication rate between the transceiver and the instrument to which it is
connected. It is important to note that this is independent of the baud rate for other transceiver(s) in the
network. For example, a pair of transceivers may be used in an application to send data from remote
process instrumentation to an engineer's computer. In this application, the baud rate for the transceiver
on the instrumentation might be set to 9600, and the transceiver on the engineer’s computer might be set
to 57,600 or 115,200.
Set Baud Rate
1.
Selecting
1
Set Baud Rate from the Main Menu displays the following window.
2.
Select the appropriate baud rate or option by typing in the associated number or letter after
Enter
Choice
. As this is the baud rate for the data port, it must match the baud rate of the device
attached to the transceiver.
3.
When the selection is accepted the Set Modem Mode menu will refresh and display the updated
mode.
4.
Press the
Esc
key to return to the main Setup menu.
LUM0002AD Version
6.1
24
