Freemotion t7.5 User Manual Download

Page: 26 / 40

PREVENTIVE MAINTENANCE

Regular maintenance is necessary for optimal performance and long life of the treadmill. Please read and

follow all instructions below. If the treadmill is not maintained as described, components may wear ex-

cessively, the treadmill may be damaged, and the warranty will be voided.

If you have questions about

maintenance, please see the back cover of this manual.

CAUTION: Make sure to remove the key and unplug

the power cord before performing any maintenance procedures.

WEEKLY MAINTENANCE

Unplug the power cord.

Inspect and properly tighten all external parts of the treadmill.

2. Apply a mild multi-purpose cleaner to a 100% cotton cloth and remove any dust and grime from the handrails,

upright, foot rails, frame, and motor hood. In addition, wipe the walking platform along the sides of the walking

belt.

Do not wipe under the walking belt.

Apply a small amount of mild multi-purpose cleaner to a 100% cot-

ton cloth and wipe the console and the screens.

Do not spray cleaner directly onto the treadmill or use

ammonia or acid-based cleaners.

3. Make sure that the walking belt is centered and properly tightened. If it is centered and runs smoothly, do not

make any adjustments. If the walking belt needs to be adjusted, see pages 30 and 31.

MONTHLY MAINTENANCE

Unplug the power cord.

Remove the two 1/4" x 3/4" Screws

(23) and the two 1/2" x 1" Screws (37) attaching the Motor

Hood (82), and lift off the Motor Hood.

2. Using a hand-held vacuum, clean the area under the Motor

Hood (not shown).

Be careful to avoid touching any com-

ponents.

Check the Drive Belt (45) for wear and cracks. If

the Drive Belt needs to be replaced, please see the back

cover of this manual.

3. Plug in the power cord and insert the key into the console. Press the Start/Stop button.

IMPORTANT: Be

careful to avoid injury; keep your hands away from moving parts and make sure that your clothes can-

not become caught in moving parts.

While the walking belt is moving, check the treadmill for unusual

noises or odors. If any of these problems exist, please see the back cover of this manual.

Remove the key

and unplug the power cord.

Reattach the Motor Hood (82) with the two 1/4" x 3/4" Screws (23) and the two

1/2" x 1" Screws (37).

1 23

Summary of Contents for t7.5









































Search results

Summary of Contents for t7.5

Reviews:

Related manuals for t7.5

Brands by name

Popular brands

Freemotion t7.5, User Manual

Search results

Summary of Contents for t7.5

Reviews:

Related manuals for t7.5

Brands by name

Popular brands