27
REPLACING THE WALKING BELT
When the walking belt becomes worn, it should be replaced. The walking belt will need to be replaced after every
10,000 to 15,000 miles (16,000 to 24,000 kilometers). See the Service Manual for replacement instructions.
Please see the back cover of this manual to order a new walking belt.
REPLACING THE WALKING PLATFORM
When both sides of the walking platform become worn, the walking platform should be replaced. The walking
platform will need to be replaced after every 20,000 to 30,000 miles (32,000 to 48,000 kilometers). Please see
the back cover of this manual to order a new walking platform. Follow the instructions below to replace the walk-
ing platform.
TURNING THE WALKING PLATFORM
Both sides of the walking platform are designed to be used as walking surfaces. Inspect the walking platform peri-
odically for wear. If there is any wood showing through the phenolic coating, or if the surface is damaged, the
walking platform should be turned over. The walking platform will need to be turned over and the walking belt re-
placed (see above) after every 10,000 to 15,000 miles (16,000 to 24,000 kilometers). Follow the instructions
below to turn over the walking platform.
1.
Remove the key and unplug the
power cord.
Remove the four 5/16"
x 1" Screws (2) and the Front Roller
Cover (68). Remove the two 5/16" x
4 3/8" Screws (29) and the two
5/16" Star Washers (54).
2. Remove the Left and Right Foot
Rail Covers (58, 70). Remove the
#12 x 1" Screws (20) and the Left
and Right Foot Rails (59, 71).
Remove the 1/4" x 1 1/2" Screws
(111), the 3/8" x 1 3/4" Bolts (112),
and the 3/8" Platform Nuts (113).
Remove the #10 x 1 1/2" Bolts (21)
and the Roller Guards (74).
Lift the Front Roller (67) and slide it
out of the Walking Belt (64).
68
2
2
29
54
54
29
1
64
21
21
74
113
113
74
112
112
20
20
20
20
58
59
71
70
20
20
67
111
111
2