7
1
4
125
115
112
2
1
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
• To identify small parts, see page 6.
• To avoid damaging parts, do not use power tools.
• Assembly requires the following tools (not
included):
one 6 mm hex key
one 8 mm hex key
one 17 mm socket wrench
one Phillips screwdriver
ASSEMBLY
1. Set a sturdy piece of packing material under the
rear of the Base (2). Have a second person
hold the Frame (1) to prevent it from tipping
while you complete this step.
Attach the Rear Stabilizer (4) to the Base (2) with
two M10 x 60mm Bolts (115), two M10 Washers
(112), and two M10 Jam Nuts (125).
Then, remove the packing material.
2
2. Set a sturdy piece of packing material under the
front of the Base (2). Have a second person
hold the Frame (1) to prevent it from tipping
while you complete this step.
Attach the Front Stabilizer (3) to the Base (2)
with two M10 x 60mm Bolts (115), two M10
Washers (112), and two M10 Jam Nuts (125).
Then, remove the packing material.
3
125
115
112
2
1
Summary of Contents for CoachBike b22.7
Page 31: ...31 NOTES ...
