Freemotion CoachBike b22.7 Owner'S Manual Download

Page: 30 / 36

COMPLIANCE INFORMATION

UNITED STATES

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equip-

ment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee

that interference will not occur in a particular installa-

tion. If this equipment does cause harmful interference

to radio or television reception, which can be deter-

mined by turning the equipment off and on, try to

correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

the receiver.

• Connect the equipment into an outlet on a circuit dif-

ferent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV tech-

nician for help.

FCC CAUTION: To assure continued compliance,

use only shielded interface cables when connect-

ing to computer or peripheral devices. Changes or

modifications not expressly approved by the party

responsible for compliance could void the user’s

authority to operate this equipment.

IMPORTANT: To satisfy exposure compliance

requirements, the antenna and transmitter in the

console must be at least 8 in. (20 cm) from all

persons and must not be near or connected to any

other antenna or transmitter.

Note: The console contains FCC ID: OMC415325.

CANADA

This device complies with RSS-210 of the Industry

Canada (IC) Rules. Operation is subject to the fol-

lowing two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept

any interference received, including interference that

may cause undesired operation. CAUTION: The

device for operation in the band 2.412–2.462 GHz is

only for indoor use.

Radiation Exposure Statement: This equipment com-

plies with IC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be

installed and operated with minimum distance 20 cm

between the radiator and your body. Information can

be obtained at: http://www.hc-sc.gc.ca/ewh-semt/pubs/

radiation/radio_guide-lignes_direct-eng.php

ICES-003/NMB-003 Statement: This device complies

with Canadian ICES-003 Class B.

Note: The console contains IC ID: 3673A-415325.

Summary of Contents for CoachBike b22.7





































Search results

Summary of Contents for CoachBike b22.7

Reviews:

Related manuals for CoachBike b22.7

Brands by name

Popular brands

Freemotion CoachBike b22.7, Owner'S Manual

Search results

Summary of Contents for CoachBike b22.7

Reviews:

Related manuals for CoachBike b22.7

Brands by name

Popular brands