Freefly movi pro, Operation Manual

Page: 64 / 110

64
| OPERATION MANUAL
NOTE
Autotuning can also be accessed and initiated
through the display screen on the GCU for convenient
autotuning when a mobile device is not available.
ADVANCED TUNING
The advanced tuning options give the user direct control over the MōVI Pro’s camera stabilization.
This allows users to customize the MōVI Pro to meet their exact needs with features such as
Filters, Jolt Rejection, and more. Advanced tuning is not recommended for normal usage.
FILTERS
The MōVI Pro has a number of software filters that are applied to remove unwanted signals from
the system. The Filter settings are the second most important setting for achieving maximum
stabilization performance. The purpose of the filters is to eliminate noise and vibration due to
structural resonances in the camera, lens, or gimbal. Setting the filters too high or too low can
cause signal disturbances that can reduce the overall stabilization.
1. Pan, Roll, and Tilt Filters
These control the strength of the filter that is applied to the motor
controller signal. The filters apply to each respective axis individually
and can be found under the Main page of the Tuning menu.
2. Gyro Filter
This controls the strength of the filter applied to the Inertial Measurement Unit’s (IMU)
signal. Adjusting the Gyro filter can be done by going to the “Advanced” page under
the tuning menu and selecting Gyro Filter. This filter applies to all three axes.