Freefly movi pro, Operation Manual

Page: 46 / 110

46
| OPERATION MANUAL
Lens
Direction
Suggested for most setups
Suggested for longer lenses
3.
Remove the Sony’s handle before mounting the top rail.
4. Use a ¼ -20 bolt and the 5/32 hex driver to attach the top rail to the top of the
camera. The rail should be mounted perpendicular to the front of the camera.
5. Proceed to page 48 for instructions on how to mount the FIZ motor to the camera package.
MOUNTING CANON C SERIES CAMERAS TO THE CAMERA RAIL
Items Needed
» Camera Package*
» Camera Rail
»
Top Rail
»
Hot shoe Adapter
»
(2) M3x6 Screw
» ¼ -20 Bolt
» 3/8-16 Bolt
»
5/32” Hex Driver*
»
7/32” Hex Driver*
»
2.5mm Hex Driver
*These items are not included with the MōVI Pro.
1. Locate one ¼-20, one 3/8-16 bolt, and the camera rail from the MōVI Pro kit.
2.
Align the camera rail so the ¼-20 and 3/8-16 bolt holes on the bottom of the
Canon camera match the Canon camera bolt pattern on the camera rail.
Insert and tighten the bolts using the hex drivers until the camera is secured
and has no play. See the diagram for suggested camera rail placement.
3.
Insert the hot shoe adapter into the hot shoe of the Canon camera and attach the
top camera rail to the hot shoe adapter using two M3x6 flat head screws.
4.
Proceed to page 48 for instructions on how to mount the FIZ motor to the camera package.