Freefly movi pro, Operation Manual, Page: 42 / 110

42
| OPERATION MANUAL
1.
Use the ¼ -20 bolts to mount the camera to the camera rail. The
camera rail also accepts a 3/8 -16 bolts for larger cameras.
NOTE
For cameras without FIZ motors, mount the
camera on the rail such that the camera and
lens package’s center of gravity is as close to
the center of the rail as possible. This will
be useful during the balancing process.
HOT SHOE AND TOP RAIL
Items Needed
»
Camera Package
»
Top Rail
»
Hot Shoe Adapter
»
(2) M3 Screw
»
2.5mm Hex Driver
1. Loosen the Hot Shoe Adapter located on one end of the top rail and
insert it into the Hot Shoe on your camera. Once inserted, tighten
the M3 screws and check that the top rail is secure.
2. Continue to page 53 for instructions on how to mount, balance, and tune your MōVI Pro.
NOTE
Some cameras do not have a hot shoe adapter; in
these cases, the top rail will mount directly to the
camera without the use of the Hot Shoe Adapter.