Freefly movi pro, Operation Manual

Page: 41 / 110

41
| OPERATION MANUAL
SETTING UP YOUR CAMERA PACKAGE
It is important that you fully build your camera package prior to balancing it on
the MōVI Pro. Adding accessories such as focus motors, receivers, batteries,
etc. to your MōVI Pro after balancing will put the setup out of balance and
require you to rebalance the system. The MōVI Pro uses a custom lightweight
camera rail to allow you to easily install and remove your camera package.
The camera rail is also used to adjust the balance of the camera package.
BASIC SETUP
These instructions will teach you how to quickly set up most DSLR and
Mirrorless cameras with the MōVI Pro. Some of the items in these instructions
are not part of the MōVI Pro Kit.
LENS
1.
Mount your preferred camera lens onto your camera by following the
specific lens mounting procedure required by the camera.
MOUNTING THE CAMERA RAIL
Items Needed
» Camera Package
» Camera Rail
»
(2) ¼ -20 bolt*
» (2) 3/8 -16 bolt*
» 5/32” Hex Driver*
»
7/32” Hex Driver*
*Depending on camera package setup