system, and that you've instructed your screen access
program to use the Braille n speak driver for speech output.
Note:
Older models of the Blazer's built-in speech
synthesizer did not support indexing (the ability of
the speech synthesizer to match precisely to a
reading cursor). Most Windows-based screen
access programs require speech synthesizers to
perform indexing. Call us to update your unit.
The Blazer is Brailling and speaking the contents of my
document.
You have the same port active in both the Blazer's Speech
Configuration ;menu and its Printer Configuration menu.
Generally, you want to have the serial port active in the Blazer's
Speech Configuration menu and the parallel port active in the
Blazer's Printer Configuration ;menu.
The Blazer is not skipping blank lines as my document is
Brailled.
Make sure to turn on Auto Linefeed from within the Blazer's
Printer Configuration menu.
The Blazer is not honoring page breaks in my document as it
Brailles.
If you're Brailling your document using a Braille translator, make
sure the Blazer has Lines per Page set to 0 in its Printer
Configuration menu.
The Blazer is splitting words inconsistently at the ends of lines
as it Brailles my document.
Make sure the Blazer has Word Wrap turned off from within its
Printer Configuration menu.
The Blazer is producing garbage characters at the beginning of
my document.
Make sure to turn on your computer or notetaker before you
turn on the Blazer for printing.
42
440102-001 Rev. A
