Enter menu mode by pressing the three keys on the top side of
the Blazer simultaneously, the Blazer says, "Configuration,
Speech config." Press the Skip key (the middle key) four times
to arrive at the Service menu. The Blazer says, "Service menu.”
To print the Blazer's built-in manual, which is the first option on
the Service menu, do the following: press Enter (the key closest
to you) once to hear the Blazer say, "Print manual?", then a
second time to begin printing. The manual comes out in
properly formatted, Grade 2 Braille.
To exit menu mode, press the three keys on the right side of
the Blazer simultaneously. The Blazer says, "Exit." You're now
back in printing mode, ready to continue Brailling your own
documents.
Testing the Braille Blazer
You can test the Blazer to check whether it's Brailling properly.
Here's how:
Enter menu mode by pressing the three keys on the right side
of the Blazer simultaneously, the Blazer says, "Configuration,
Speech config." Press Skip (the middle key) four times to arrive
at the Service menu. The Blazer says, "Service menu."
Move directly to the option for testing whether the Blazer is
Brailling properly, as follows. First, press Enter (the key closest
to you). The Blazer says, "Print manual?" Since we want to
bypass this option, press skip once to arrive at, "Print test." To
run the test, press Enter. The Blazer Brailles a single page of
text that provides a brief overview of the capabilities of the
Blazer.
To exit menu mode, press the three keys on the right side of
the Blazer simultaneously. The Blazer says, "Exit." You're now
back in printing mode, ready to continue Brailling your own
documents.
440102-001 Rev. A
37
