press Skip (the middle key) twice to bypass the Speech
Configuration menu and the Printer Configuration menu.
You'll hear, "Sideway Print config." Press Enter to move
through the menu's settings.
At this point, you can do the following:
•
Press Skip to move forward through the Sideway Print
Configuration menu's settings.
•
Press Back (the key furthest away from you) to move
backward through the Sideway Print Configuration menu's
settings.
•
Press Enter to cycle through a setting's choices.
Any change you make to a setting takes effect when you move
to another setting, move to another menu, or exit menu mode
altogether.
Selecting Sideway Print
If you want the Blazer to Braille sideways on the page, you
must turn on Sideway print and flip the platen bar. Here's what
to do.
When you enter the Sideway Print Configuration menu, the
Blazer says, "Sideways print off, active", which is the default. To
turn it on, press Enter.
Now open the cover of the Blazer and feel for the rubber knob
on the back right side of the platen bar. Lift up and flip the bar
completely around so that the rubber knob is facing toward you
and the platen bar is once again lying flat against the paper.
When you exit menu mode, the Blazer will be ready to receive a
document formatted for landscape Brailling. When you're ready
to resume Brailling documents in a portrait orientation,
remember to turn sideways print off again and flip the platen
bar back to its original position with the rubber knob to the
backside of the platen bar.
32
440102-001 Rev. A
