![background image](http://html1.mh-extra.com/html/freecom/tapeware-lto-460i/tapeware-lto-460i_manual_2329752017.webp)
15
15
Step 5: Install the drive
1
Slide the tape drive into the open bay, aligning the tray or rails with the slots in the bay, as
shown in Figure 5.
If your computer does not use mounting hardware, check that the holes in the chassis are
aligned with the holes in the side of the tape drive.
Do not secure the drive with screws at this point because you may have to move the drive to
get the cables into place.
gen2 internal oem.fm Page 15 Thursday, February 13, 2003 3:03 PM
Summary of Contents for TapeWare LTO 460i
