©2009
8
STEP 3: CONNECTING ARM ASSEMBLY
1.
Align the hole in the end of the Connecting arms (L&R)(7&8)(pivoting rod end) with the hole in the bracket of
the Lower Handle Bars (L&R)(3&4). The rod end should be on the inside of the Lower Handle Bars
(L&R)(3&4) bracket. Take 2pcs of 5/16" x 1-1/4" Hex Head Bolts (71) and install it through the Lower Handle
Bars (L&R)(3&4) bracket and the rod end. Install 2pcs of 5/16" x 20 x 1.5T Flat Washers (98), 2pcs of 5/16" x
7T
Nyloc Nuts (105) tighten firmly using the 12m/m Wrench (111) on the 5/16" x 7T Nyloc Nut (105) and one on
the 5/16" x 1-1/4" Hex Head Screw (71).
2.
Install the 2 pcs of Rails (15) into the receiving bracket in the end of Main Frame (1) with 2 pcs of 3/8” x 2-1/4”
Button Head Socket Bolts (77), 2pcs of 3/8" x 19 x 1.5T Flat Washers (94) and 2 pcs of 3/8" x 7T
Nyloc
Nut
(89) by using 2 pcs of the 13/14m/m Wrench (111).
3.
Put the Lug Covers (L&R) (61& 62) onto the Rail Strap (16). Slip the Rail Strap (16) through the slots in the
Lug Covers (L&R) (61& 62), then Install onto the Rails (15) with 2 pcs of 5/16” x 3/4” Button Head Socket
Bolts (76) and 2 pcs of 5/16" x 20 x 1.5T Flat Washers (98) by using Combination M5 Allen Wrench & Phillips
Head Screw Driver (108).
