©2009
9
STEP 4: PLASTICS ASSEMBLY
1.
Install the Connecting Arm Covers (L & R) (59 & 60) over the connection of the rod end and Lower Handle
Bars (4 & 5) with 4pcs of M5 x 15m/m Phillips Head Screws (79) and 2pcs of
ψ
3.5x12m/m Self Tapping
Screws (84) by using the Combination M5 Allen Wrench & Phillips Head Screw Driver (108).
2.
Install the 2pcs of Wheel Covers (52) using the 4pcs of M5x15m/m Phillips Head Screws (79).
3.
Install the Front Handle Bar Cover (L & R) (54 & 56) and Rear Handle Bar Cover
(L & R) (55 & 57) over the Handle Bars (13&14) axle connections with the 6 pcs of 3.5x12m/m Self
Tapping Screws (84) by using Phillips Head Screw Driver (108).
PLEASE ENSURE ALL FASTENERS ARE TIGHT AFTER THE COMPONENTS HAVE BEEN
ASSEMBLED
