14
©
Fraser Anti-Static Techniques Ltd
2020
The bar is equipped with a remote monitoring interface that allows the operating
status of the bar to be fed into a PLC system or checked remotely.
See Section 11 for wiring instructions and examples for the remote monitoring
interface .
6.
Status LEDs
LED Indication
Bar Status
Ionisation
All off
The bar is not powered
Inactive
All flashing red
Standby mode
Inactive
All solid red
There is a fault with the bar
Inactive
All flashing green/red
‘Clean Me’. The bar needs attention.
Active
All flashing green
Frequency of the HV. Bar OK.
Active
Scrolling right, green
+
I
ntelligence.
The speed is proportional to the level of intelligence.
Active
Scrolling left, green
-
I
ntelligence.
The speed is proportional to the level of intelligence.
Active
The status of the bar,
including the need for
cleaning, is indicated by
the 5 bi-colour LEDs on
the endcap.
