5
XIFOS 33 OI - Iss.3 - EN
1.1 Explanation of Symbols
Warning!
This symbol appearing in the operating instructions refers to operations which,
if carried out improperly, can result in serious personal injuries.
Caution!
This symbol appearing in the operating instructions refers to operations which,
if carried out improperly, can result in damage to property.
Information!
This symbol refers to information that relates to obtaining the best performance
and operating life from the product.
1.2 Checking on Delivered Equipment
The equipment leaves our factory in suitable protective packaging. Please check
that it is undamaged when it arrives. If there is visible damage, contact the Factory
or one of our Distributors before carrying out any installation.
Check that the parts which have been delivered are the same as you have ordered.
Loose Parts
Bars up to 1,000 mm in length are supplied with two ‘T’ fixings.
Extra ‘T’ fixings are supplied for each additional 500 mm or part
thereof. For example:
750 mm:
2 ‘T’ fixings
1,500 mm:
3 ‘T’ fixings
1,750 mm:
4 ‘T’ fixings
It is important to use all of the supplied ‘T’ fixings.
Emitter Key and two spare emitters.
Power Supply Cable. M12 5-pin Connector and lead or Power
Supply Unit - as per order. See Section 14 for details of cables and
other accessories.
Warning!
DO NOT USE
standard ‘computer style’ PSUs. These do not have secondary earth
connections and risk shocks to the operator and damage to the bar. Only use the
Fraser external Power Supply Unit (Part No. NEOS-PSU).
1. Introduction
