Chapter 1
Ready, set up, go
15
At the End of the Wash Cycle
When the working cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn off
the appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher
Wait for a few minutes before unloading the dishwasher to avoid scald the dishes and utensils are still hot and
more susceptible to breakage. They will also dry better.
• Switch Off the Dishwasher
The Led screen is on but the colon icon is not blinking, only in this case the programme has ended.
1. Switch off the dishwasher by pressing the ON/OFF button.
2. Turn off the water tap.
• Open the door carefully.
Hot dishes are sensitive to knocks. The dishes should be allowed to cool down around 15 minutes before
removing from the appliance.
Open the dishwasher’s door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
• Unloading the dishwasher
It is normal that the dishwasher is wet inside.
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket
onto the dishes in the lower one.
WARNING:
It is dangerous to open the door when washing, because hot water may scald you.
MAINTENANCE AND CLEANING
Filtering System
The filter prevents larger remnants of food or other objects from getting inside the pum.
The residues may block the filter, in this case they must be removed.
2
3
1
Main Filter 1
Food and soil particles trapped in this filter are pulverized by a special jet
on the lower spray arm and washed down to drain.
Coarse Filter 2
Larger items, such as pieces of bones or glass, that could block the drain
are trapped in the coarse filter. To remove the items caught by this filter,
gently squeeze the tap on the top of this filter and lift it out.
Fine Filter 3
This filter holds soil and food residues in the sump area and prevents it from
being redeposit on the dishes during wash cycle.
Filter Assembly
The filter efficiently removes food particles from the wash water, allowing it to be recycled during the cycle. For
best performance and results, the filter must be cleaned regularly. For this reason, it is a good idea to remove the
larger food particles trapped in the filter after each wash cycle by rinsing the semicurcular filter and cup under
running water. To remove the filter device, pull the cup handle in the upward direction.
WARNING:
• The diswasher must never be used without the filters.
• Improper replacement of the filter may reduce the performance level of the appliance and damage dishes
and utensils.
1
2
Step 1: Turn the filter in anti-clockwise direction.
Step 2: Lift the filter assy up.
NOTE:
When following this procedure from step 1 to step 2, the filter system will be removed;
When following it from step 2 to step 1, the filter system will be installed.
