22
Problem
Possible Causes
What to do
The dishes are
not clean
The dishes were not
loaded correctly.
See notes in “Loading the Dishwasher Baskets”.
The program was not
powerful enough.
Select a more intensive programme. See “Wash Cycle Table”.
Not enough detergent
was dispensed.
Use more detergent, or change your detergent.
Items are blocking the
path of spray arms.
Rearrange the items so that the sprayer can rotate freely.
The filter comination is
not clean or is not or is
not correctly fitted. This
may cause the spray arm
jets to get blocked
Clean and/or fit the filter combination correctly. Clean the
spray arm jets. See “Cleaning the Spray Arms”.
Cloudiness on
glassware.
Combination of soft water
and too much detergent.
Use less detergent if you have soft water and select a shortest
cycle to wash the glassware and to get them clean.
Black or grey
marks on dishes.
Aluminum utensils have
rubbed against dishes.
Use a mild abrasive cleaner to eliminate those marks.
Detergent left in
dispenser cups.
Dishes block detergent
cup opens.
Re-loading the dishes properly.
The dishes are
not drying.
Improper loading.
Load the dishwasher as suggested in the directions.
Too little rinse-aid.
Increase the amount of rinse-aid/refill the rinse-aid dispenser.
Dishes are removed too
soon.
Do not empty your dishwasher immediately after washing.
Open the door slightly so that the steam can escape. Begin
unloading the dishwasher only once the dishes are barely
warm by touching. Empty the low basket first. This prevents
water form dropping off dishes in the upper basket.
Wrong program has
been selected.
In short program the rinse temperature is lower. This also
lowers cleaning performance. Choose a program with a long
high rinse temperature.
Use of cutlery with a
low-quality coating.
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for washing in
the dishwasher.
ERROR CODES
When some malfunctions occur, the appliance will display error codes to warn you:
Codes
Meanings
Possile causes
E1
Longer inlet time.
Faucet is not opened, or water intake is restricted, or water
pressure is too low.
E3
Not reaching required temperature.
Malfunction of heating element.
E4
Overflow.
Some element of dishwasher leaks.
E8
Failure of orientation of distributary
valve.
Open circuit or break of distributary valve.
Chapter 2
Problem, meet solution
