Chapter 1
Ready, set up, go
17
How to Keep your Dishwasher in Shape
• After every wash
After every wash, turn off the water supply to the
appliance and leave the door slightly open so that
moisture and odours are not trapped inside.
• Remove the Plug
Before cleaning or performing maintenance,
always remove the plug from the socket.
• No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the
dishwasher, do not use solvents or abrasive
cleaning products.
Only use a cloth with warm soapy water.
To remove spots or stains from the surface of
the interior, use a cloth dampened with water
and a little vinegar, or a cleaning product made
specifically for dishwashers.
• When not in Use for a Long Time
It is recommended that you run a wash cycle with
the dishwasher empty and then remove the plug
from the socket, turn off the water supply and
leave the door of the appliance slightly open. This
will help the door seals to last longer and prevent
odours from forming within the appliance.
• Moving the Appliance
If the appliance must be moved, try to keep it in
the vertical position. If absolutely necessary, it
can be positioned on its back.
• Seals
One of the factors that cause odours to form in
the dishwasher is food that remains trapped in
the seals. Periodic cleaning with a damp sponge
will prevent this from occurring.
INSTALLATION INSTRUCTION
Positioning the Appliance
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides,
along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that can be
positioned either to the right or the left sides to facilitate proper installation.
Levelling the Appliance
Once the appliance is positioned for levelling, the height of the dishwasher may be altered
via adjustment of the screwing level of the feet.
About Power Connection
Warning:
For personal safety:
• DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.
• DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE EARTHING CONNECTION FROM THE POWER
CORD.
Electrical Requirements
Please look at the rating label to know the rating voltage and connect the dishwasher to the appropriate power
supply. Use the required fuse 10 amp, time delay fuse or circuit breaker recommended and provide separate
circuit serving only this appliance.
Electrical Connection
Ensure the voltage and frequency of the power being corresponds to those on the
rating plate. Only insert the plug into an electrical socket which is earthed properly.
If the electrical socket to which the appliance must be connected is not appropriate
for the plug , replace the socket, rather than using a adaptors or the like as they
could cause overheating and burns.
GROUNDING INSTRUCTIONS
This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the
risk of electric shock by providing a path of least resistance for the electric current. This appliance
is equipped with a cord having an equipment-earthing conductor and an earthing plug. The plug
must be plugged into an appropriate outlet that is installed and earthed in accordance with all local
standards and requirements.
