Chapter 1
Ready, set up, go
14
Turning On the Appliance
Starting a cycle wash
1. Draw out the lower and upper basket, load the dishes and push them back. It is commended to load the
lower basket first, then the upper one (see the section entitled Loading the Dishwasher basket ).
2. Pour in the detergent (see the section entitled Detergent and Rinse Aid ).
3. Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification of the socket is
10A 250VAC. Make sure that the water supply is turned on to full pressure.
4. Close the door, press the On/Off button to switch on the machine.
5. Press the program Button, the wash program will be changed as follows direction:
ECO -> GLASS -> 90 MIN -> RAPID -> AUTO -> INTENSIVE -> HEAVY -> ECO;
If a program is selected, the responding light will be on. Then press the Start/Pause button, the dishwasher
begins to start. If you want to improve the drying efficiency, you can press the Option button to select extra
drying function before the dishwasher begins to start. (Exclude Rapid and Soak)
NOTE:
When you press the Start/Pause button to pause during washing, the LED display window“ ” will stop blinking
and the dishwasher will mooing every minute unless you press the Start/Pause button to start.
Change the Program
Premise:
1. A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the
detergent may have already been released, and the appliance may have already drained the wash water. In
this case, the detergent dispenser must be refilled (see the section entitled “ Detergent “ ).
2. Press the Start/Pause button, the machine will be in standby state, press the program button more than 3s
then you can change the program to the desired cycle setting (see the section entitled “ Starting a wash “ )
3. The LED display shows the state of the dishwasher:
a) The Screen shows H MM and the colon icon not blinking------------------Stand by or Being paused
b) The Screen shows H MM and the colon icon blinking-----------------------Running
NOTE:
If you open the door during a wash cycle, the machine will pause. The LED display window “ “ will stop blinking
and the buzzer will mooing every minute unless you close the door. After you close the door, the machine will
kepp on working after 10 seconds.
Forgot to Add a Dish
A forgotten dish can be added any time before the detergent cup opens.
1. Press the Start/Pause Button to stop the washing.
2. Open the door a little.
3. After the spray arms stop working, you can open the door completely.
4. Add forgotten dishes.
5. Close the door.
6. Press the Start/Pause Button, the dishwasher will start running at one.
