EFFECTS GUIDE
Doc v6.00c
47
The effect of this is subtle and most apparent at edge of breakup. Lower values give softer saturation, higher
values give a more aggressive breakup.
POWER AMP LO CUT,
POWER AMP HI CUT
– These filters are provided for shaping the tonal color of
the virtual power amp. Note that in addition to applying a voicing filter, the
POWER AMP VOICING
parameter
(
Basic Amp Parameters
, beginning on p. 41) will also automatically set values for
POWER AMP LO
and
HI CUT
.
BIAS EXCURSION
– Controls how much the grid voltage droops when the grids conduct.
EXCURSION TIME, RECOVERY TIME
– control the time constants associated with bias excursion.
DYNAMICS, DYNAMICS TIME
– These control the dynamics processor in the amp block, affecting the
feel of the amp by setting how much and how quickly the level compresses in response to higher input.
AMP Mix Page
The
Amplifier
block also has a
MIX
page with
LEVEL
,
BALANCE,
and
BYPASS MODE
parameters.
See
Common Mix Parameters
on p.
117
for more information.
AMP block Resolution
Presets which use a single amp block run in high-resolution mode, utilizing an entire processor. This provides
greater fidelity and resistance to aliasing. This mode is automatic and is selected whenever there is only one amp
block in the layout grid. Adding a second amp block will revert both to normal resolution. Note that switching
between presets with differing number of amp blocks may introduce an additional delay as a “soft reset” of the
amp blocks must be done whenever changing the resolution.
Summary of Contents for AXE-FX II
Page 1: ...Owner s Manual ...
Page 82: ...EFFECTS GUIDE Doc v6 00c 71 ...
