EFFECTS GUIDE
Doc v6.00c
113
LEVEL 1–16
– These parameters appear as sliders across two pages. They set the out level for each of the 16
bands.
PAN 1–16
– These parameters appear as sliders across two pages. They set the out pan for each of the 16
bands.
Vocoder Mix Parameters
The
Vocoder
block has a
MIX
page with
MIX, LEVEL
,
BALANCE
,
BYPASS MODE,
and
GLOBAL MIX
parameters.
See
Common Mix Parameters
on p.
117
for more details on these.
5.33
Volume/Pan [VOL]
The
Volume/Pan
block can be used either as a “spot fix,” to adjust volumes or pans within a preset, or as a
dynamic control with an external expression pedal.
Each Axe-Fx II preset can use four fully independent
Volume
blocks.
VOLUME
– Scales the output level out of the block. Assign a modifier to create a volume pedal. See the Wah
pedal tutorial for more details on doing this (p.
162
).
BALANCE
– Sets the balance (L/R) out of the block.
VOLUME TAPER
– Sets the “taper” of the volume control. “LINEAR” selects a linear taper. Log 30A, 15A,
and 10A select various tapers typically used for volume control.
INPUT SELECT
–This control determines how incoming stereo signals will be passed. Options include
STEREO, LEFT ONLY, or RIGHT ONLY.
PAN L, PAN R
– Controls the panning of the left and right output signals.
BYP MODE
– Sets the bypass mode of the block. See
Common Mix Parameters
on p.
117
for more
information.
LEVEL
– Sets the output level of the block independent of the setting for the
VOLUME
control.
Summary of Contents for AXE-FX II
Page 1: ...Owner s Manual ...
Page 82: ...EFFECTS GUIDE Doc v6 00c 71 ...
