FPS PowerSewer V4PS, Installation, Operation & Maintenance Manual

Page: 22 / 32

22
IGP-A AUTOMATIC SERIES GRINDER PUMPS
• Powerful 2 hp, 3450 rpm motor to handle the
demands of grinding domestic sewage
• Start/Run components encased in oil-free
chamber requiring no control panel
• Carbon/Ceramic mechanical seal
• Deflection-resistant, short motor shaft
• Corrosion-resistant brass impeller minimizes
downtime and maintenance
• Seven-vane, angled face, non-clogging,
balanced impeller
• Tight cutting clearances for superior grinding
at 414,000 cuts per minute
• Epoxy-coated finish for corrosion resistance
and durability
• Built-in overload protection prevents
over-current/over-temperature damage
Motor Cover Cast iron with epoxy coating
Motor Cover O-ring Nitrile
Motor Design
Single-phase, capacitor start, capacitor run
Insulation Class F
Overload Protection Internal, on winding thermal protector
Motor Shaft
*AISI 300 series stainless steel
Ball Bearing-Upper Single row ball, 6203
Ball Bearing-Lower Single row ball, 6306
Seal Housing Cast iron with epoxy coating
Mechanical Seal Carbon/Ceramic
Volute
Cast iron with epoxy coating
Impeller Brass
Rotating Cutter
2-blade design, AISI 440C stainless steel,
through-hardened to Rockwell 55-60C
Stationary Cutter
AISI 440C stainless steel, hardened to Rockwell 55-60C
External Hardware 300 series stainless steel
Power Cable Type SOW-A or SOW 14/3 AWG
*In contact with fluid pumped
Construction
Performance (GPM @ Head)
Shut-Off PSI Weight
20' 40' 60' 80' 100' 120'
32 31 30 25 20 10 130' 56 104
0
40
0 20 40 60 120 100 80 140
0
20
40
60
80
100
140
120
36
32
28
24
20
16
12
8
4
0 5 15 10 20 30 25 35 40
HEAD - FEET
HEAD - METERS
FLOW - LITERS/MINUTE
FLOW - GALLONS/MINUTE
Performance
11.40"
5.50"
9.30"
9.63"
11.50"
A-N595
18.61"
21.90"
6.06"
3.58"
INLET
3.29"
11.40"
5.50"
9.30"
9.63"
11.50"
A-N595
18.61"
21.90"
6.06"
3.58"
INLET
3.29"
Model HP Volts Hz Phase
Full Load
Amps/Watts Cord
IGP-A231-10 2 208-230 60 1 13.9/3200 10'
Specifications
Shown with optional leg kit (599078)