GreenFire GF75-1 BioEnergy Stove
24
TR
OUBLESHOO
TING
TROUBLESHOOTING
TROUBLESHOOTING
IMPORTANT: Always disconnect your stove before doing any maintenance or
repairs. Only a qualifi ed technician should take care of any electrical problems.
Error code
Problem
Solution
EE
Shows when stove is connected
If desired, start stove.
but shut down.
E1
a) Poor start-up. Stove didn’t
Allow stove to cool then re-start.
reach 130 deg.
b)
Hopper
empty.
Follow
procedure
for
cold
start.
E2 **
This code is not in use.
E3
Low voltage, below 9.6 VDC.
Charge battery.
E4
This code not in use.
E5
Power interruption for more
Allow stove to cool then restart.
than
ten
seconds.
E6
Indicates unit has been unplugged
Plug into wall outlet.
before the stop icon was pressed.
E7
This code not in use.
E8
This indicates circuit board failure.
Contact your dealer.
E9
This indicates circuit board failure.
Contact your dealer.
F1
This indicates circuit board failure.
Contact your dealer.
F2
This indicates circuit board failure.
Contact your dealer.
F3
This indicates circuit board failure.
Contact your dealer.
F4
Test code for board manufacturer.
Will not show in normal use.
F5
Auger feed motor fuse blown.
Clear jammed auger and replace fuse.
F6
Auger ash extraction motor fuse
Clear jammed auger and replace fuse.
blown.
