GreenFire GF75-1 BioEnergy Stove
15
OPERA
TION
918-422e
Quick Restart
In case of a short power failure without battery back-up, there is a
possibility of starting the unit only if fl ames are present in the burn pot.
Caution:
Never use gel or matches if the fl ame or the fuel bed contains
red embers which are visible in the burner or the burner is hot. Press
and hold for 10 seconds the green icons (7,8 or 9) whichever represents
the type of fuel deployed in the hopper. This will activate the second
stage of the starting mode (A2).
VERY IMPORTANT
If the burner produces only smoke, immediately stop this procedure by
pressing on the red icon (10). Wait until the stove is completely cold
before starting up again.
Normal Operating Sounds of Pellet and BioEnergy
Stoves
This is a mechanically driven product
.
It should be noted that you
will hear sounds from your appliance. This is perfectly normal due to
there being two fan motors and two auger motors used within your
appliance.
Error
Code
Problem
Solution
EE
Shows when stove is connected but shut
down.
If desired, start stove.
E1
a) Poor start-up. Stove did not reach 130
degrees.
b) Hopper empty.
Allow stove to cool
then re-start.
Follow procedure for
cold start.
E2 **
This code is not in use.
E3
Low voltage, below 10.5 VDC.
Charge battery.
E4
This code not in use.
E5
Power interruption for more than ten
seconds.
Allow stove to cool
then restart.
E6
Indicates unit has been unplugged before the
stop icon was pressed.
Plug into wall outlet.
E7
This code not in use.
E8
This indicates circuit board failure.
Contact your dealer.
E9
This indicates circuit board failure.
Contact your dealer.
F1
This indicates circuit board failure.
Contact your dealer.
F2
This indicates circuit board failure.
Contact your dealer.
F3
This indicates circuit board failure.
Contact your dealer.
F4
Test code for board manufacturer.
Will not show in
normal use.
F5
Auger feed motor fuse blown.
Clear jammed auger
and replace fuse.
F6
Auger ash extraction motor fuse blown.
Clear jammed auger
and replace fuse.
OPERATING INSTRUCTIONS
