7 Operations of CEMS2000 Monitoring Software
85
FOCUSED PHOTONICS INC
7.3.2.3
Purging Parameter
This function is used for reading and setting the purging parameter by the users, including the
purging interval, probe purging time and flow rate purging time, as shown in Fig 7-44.
Fig 7-44
Purging Parameter
The meanings of items in this window are:
z
Probe purging interval: Set the interval of probe purging
z
Probe purging time: Set the duration of each probe purging
z
Flow rate purging interval: Set the interval of flow rate purging
z
Flow rate purging time: Set the duration of each flow rate purging for both flow rate A
and flow rate B
z
Start time of single purging: Set the start time of single purging
z
End time of single purging: Set the end time of single purging
You can click the “Read” button to read the parameter information of the purging and click
the “Set” button to save the settings. Click the “
” button at the top right of the window to return
to the main window.
Note:
CEMS-2000 System uses pulse purging. The time between each end and start of purging is
the single purging interval.
