IN
– M11C-B003/004/007
- 23 -
© Future Products Group
SERVICING
Electrical Protection
CABINETS
-
SERVICING
Circuit Breaker
The lighting circuit is protected by a
circuit breaker, located on the control
gear chassis.
The circuit
breaker is
accessible
through a hole
in the side of
the chassis.
If the breaker cannot be reset, call an electrician to
check the circuits.
Lighting
CABINETS
-
SERVICING
Caution
DO NOT service the lights, without isolating the cabinet at the main switch or
unplugging it from the electricity supply.
Fluorescent
Tubes
Remove the plastic diffuser from the metal
extrusion to access the fluorescent tube.
Rotate the tube by 90°, to release it.
After changing the tube, replace the plastic
diffuser. Locate one edge of the diffuser strip
in the extrusion groove, and curve it into the
other groove.
Test
Turn the power on and test lighting operation.
If normal operation cannot be restored, by replacing the tube, call an electrician.