![background image](http://html1.mh-extra.com/html/fpg/visair/visair_product-manual_2325935025.webp)
IN
– M11C-B003/004/007
- 25 -
© Future Products Group
Refrigeration Equipment
cont.
CABINETS - SERVICING
Evaporator Fan
Replacement
The fan deck is not fixed in place, and can
be unplugged to replace a faulty fan.
The fan speed is
electronically
programmed, so
the correct spare
must be used.
Evaporator Coil
and
Accumulator
The evaporator coil and accumulator are
accessed by removing the inside back
panels of the cabinet, see Cleaning.
Take care not to
disturb the location of
the two probes. One
is in the air flow, the
other in the coil fins.
Condenser Fan
Replacement
To access the condenser fans, remove the
side panels from the base of the cabinet.
Each fan is located on a pull-out chassis,
one on each side of the cabinet. They can
be withdrawn and unplugged for servicing.
Condenser
Radiator
The condenser radiator runs across the
bottom of the cabinet, at the back. It is
accessed by removing the rear panels.
It is vital that the radiator is kept clean. If air
flow is restricted, refrigeration efficiency will
be poor.
The radiator fins must be regularly
cleaned, using compressed air.
Be careful not to disturb the location of the probe, which measures the
temperature of the air leaving the radiator.
Continued on next page