NT500 VAG Scanner User’s Guide_English Version_V1.00
36
●
Reset Service Interval Insp1(Days)
●
Reset Service Interval Insp2(Days)
●
Reset Days And Km After Service
●
Pre-set Value Oil(Km)
●
Pre-set Value Oil(Days)
●
Pre-set Value Insp1(Km)
●
Pre-set Value Insp1(Days)
●
Pre-set Value Insp2(Km)
●
Pre-set Value Min Oil(Km)
●
Pre-set Value Max Oil(Km)
●
Pre-set Value Oil Quality(Km)
●
Read, Set Km Remaining To Oil Service
●
Read, Set Days Remaining To Oil Service
●
Read, Set Km Remaining To Insp1
●
Read, Set Days Remaining To Insp1
●
Read, Reset Km After Oil Service
●
Read, Reset Days After Oil Serv.
●
Read, Reset Days After Insp1
●
Read, Reset Km After Insp2
NOTE
●
Available functions will vary depending on the type of electronic instrument panel.
●
The service intervals are measured/set/reset in kilometers even when the speedometer shows
miles. The scan tool will calculate the equivalence in miles when showing kilometers.
●
The service intervals can be changed in steps of 100 kilometers only. It is not always possible to
set them to a round number of miles. The only exceptions are some new instrument panels,
Type H and J, which use miles as base value.
●
Depending on the type of Instrument Panel, up to three different types of service intervals are
available
- Oil Service
– oil change
- Inspection 1
– yearly inspection
- Inspection 2
– bi-yearly inspection
●
Depending on the type of Instrument Panel, the limit values for the above type of inspections are
in kilometers and/or days.
To perform an electronic service interval reset:
1.
Select
Oil Service
from Maintenance menu.
Figure 4-55 Sample VW Menu Screen
2.
The Oil Service menu displays.
