NT500 VAG Scanner User’s Guide_English Version_V1.00
19
Figure 4-13 Freeze Data screen
3.
Press function key
Save
to store freeze frame information. Or use the
BACK
key to exit.
4.1.3.3 Erase Codes
Erase Codes menu lets you to clear all current and stored DTCs from a selected control module.
Also it erases all temporary ECU information, including freeze frame. So make sure that the
selected system are completely checked and serviced by technicians and no vital information will
be lost before clearing codes.
NOTE
●
To clear codes, make sure that the ignition key is switched to ON with the engine off.
●
Erase Codes does not fix the problem that caused the fault! DTCs should only be erased after
correcting the condition(s) that caused them.
To clear codes:
1.
Scroll with the arrow keys to highlight
Erase Codes
from Function Menu and press the
ENTER
key.
Figure 4-14 Sample Function Menu Screen
2.
Follow the on-screen instructions and answer questions about the vehicle being tested to
complete the procedure.
