This product incorporates copyright protection technology that is protected by U.S.
patents and other intellectual property rights. Use of this copyright protection technology
must be authorised by Macrovision, and is intended for home and other limited pay per
view uses only, unless otherwise authorised by Macrovision. Reverse engineering or
disassembly is prohibited.
A product with the Dolby Digital decoder system. Manufactured under license from
Dolby Laboratories. “Dolby”, and the double-D symbol are trademarks of Dolby
Laboratories. All rights reserved.
Declaration of Conformity No. 4409 (cable); 4410 (satellite)
Trademark of the DVB - Digital Video Broadcasting Project
The FOXTEL remote control
FOXTEL
Takes you from the TV Guide
(or any FOXTEL Digital
screen) to the last channel
you were watching
av
Switches to ‘AV mode’
box office
To order movies and events
from the FOXTEL Box Office
tv guide
Displays the FOXTEL Digital
Guide’s programme listings
screen
setup
Displays the Setup screen
where you can change the
set-top unit’s settings
vol + and –
Changes the volume up or
down
mute
Turns the sound on or off
colour buttons
Use to select the matching
colour option shown on
screen
red colour button
Launches an active service
when you see the red button
on your TV screen
number buttons (0-9)
Use to change channel, enter
numbers and select
on-screen options
S
Puts the set-top unit into or
out of standby
active
Displays the Active screen
for FOXTEL’s range of
interactive services
planner
Displays your Personal
Planner, to view your
programme reminders
i
Displays more information
about a programme
ch + and –
Changes channel and pages
up and down through listings
in the TV Guide
arrow buttons
U
,
D
,
L
,
R
Moves the highlight around
the screen
select
Confirms a choice or makes
a selection
Also displays the i-search
banner
help
Tunes to the Customer Care
channel or displays help
information
back
Jumps back to the previous
screen or previous channel
you were watching
Before calling FOXTEL for troubleshooting assistance,
please run through the following steps:
Check
when
complete
What should I check?
What do I do next?
Is the power lead from the FOXTEL Digital set-top
unit connected to the power point and the power
turned on?
If not, connect the
power lead and turn
on the switch at the
power point
Is the FOXTEL Digital set-top unit standby light green?
If not, press the
standby
button on
the FOXTEL Digital set-top
unit
Is the television on the A Channel?
If yes, ensure you have
pressed the
FOXTEL
button on the remote
control
Is the smartcard inserted correctly?
Ensure the gold chip is
facing down and the
arrow on the top of
the smart card is facing
the FOXTEL Digital set-top
unit
Is the FOXTEL cable from the FOXTEL wallplate to
the FOXTEL Digital set-top unit tightly secured?
If not, tighten the
FOXTEL cable to the
wallplate and the
FOXTEL Digital set-top unit
Are the leads from the FOXTEL Digital set-top unit to
the TV connected?
If not, connect the
leads
Once this is complete,
press the
standby
button on the
FOXTEL Digital set-top unit
Welcome to FOXTEL
Important TV care information
Do not allow a still image to be displayed on your TV screen for an extended period of time. This can
cause a permanent residual image (‘burn-in’) remaining on your screen. Examples of still images include:
- Channel logos and certain channel formats;
- Images displayed in a 4:3, 14:9 and 16:9 mode that are different to your TV set up;
- On-screen information (ie Tickers and Active features) that are part of programmes;
- Electronic Programme Guides;
- Games and voting features;
- Audio channels.
Plasma, Rear Projection and LCD televisions are at a higher risk of burn-in. These televisions are more
prone to burn-in during the first 200 hours of use.
Always consult your television manufacturer’s manual for proper operating instructions.
Version 1.0 November 2006
Try performing a ‘soft re-boot’ of the FOXTEL
Digital set-top unit. To do this, press the
reset
button
on the front panel of the FOXTEL Digital set-top unit,
holding it down for three seconds.
Summary of Contents for X Digital
Page 1: ......